Diesel Engine Water Pump
1) Inlet/Outlet: 80mm (3") ; 2) Total lift(m): 26 ; 3) Maximum capacity(L/min): 1100 ; 4) Engine model: 178F ; 5) Engine: air-cooled, 4 stroke, OHV 25 degrees inclined single cylinder ; 6) Max. Output (PS/rpm): 5.5/3600 ; 7) Displacement(cc): 296 ; 8) Compression ratio: direct injection.

Electric Motor
1) Voltage (V): 220 ; 2) Frequency (Hz): 50 ; 3) Pole: 6 ; 4) Nominal output power (W): 40-60 ; 5) Rated speed (rpm): 800-850 ; 6) Capacitor (uF/450V): 2.5-3.0 ; 7) This fan motor is applied to indoor units of packing type air conditioners

Diesel Engine
1) Type: single-cylinder, vertical, 4-stroke air-cooled ; 2) Combustion system: direct injection ; 3) Bore x stroke: 78 x 62mm ; 4) Displacement: 296cc ; 5) Engine speed: 3000, 3600rpm ; 6) Continuous output: 3.68, 4.01kW ; 7) Maximum output: 4.01, 4.4kW ; 8) Starting system: manual/electric ; 9) Fuel tank capacity: 3.5L ; 10) Lube oil capacity: 1.1L ; 11) Dimensions ( L x W x H): 383 x 421 x 450mm ; 12) N.W.: 33kg ; 13) Power take off : crank shaft or cam shaft (cam shaft PTO rpm is 1/2)

Gasoline Engine Powder Metallurgy Parts
Place of Origin: China. Features: 1) Material: iron powder metallurgy parts (According to MPIF) ; 2) Density: 6.8g/cm³

Gasoline Engine
1) Forced air-cooled ; 2) 4 stroke ; 3) OHV single cylinder ; 4) 13hp/3,600rpm

Three-Phase Induction Motor
1) Totally enclosed ; 2) Fan-cooled ; 3) Three phase squire cage induction motor ; 4) IEC standards ; 5) Outstanding performance ; 6) High efficiency ; 7) Energy-saving ; 8) High starting toque ; 9) Low noise ; 10) Little vibration ; 11) Reliable operation ; 12) Easy maintenance.

Rolling Door Motor
KL-JL series of DC electric rolling door motor is the streamlined rolling door motor developed by our company. This machine is better than traditional motor, so the users can install it more easily, operate it more safely. It can also work under low power. It is designed to save power and can save about 60% of power. The machine has two installation styles: right and left. The control system adopts the wired control operation. It is operated by microcomputer controller and the users can also set the storage power. It is used in the place where power is often absent.

Tubular Motor
Features: 1) Voltage: 230V ; 2) Input power: 230W ; 3) Current: 0.1A ; 4) Speed: 17rpm ; 5) Torque: 10Nm ; 6) Working duration:>=4min ; 7) Insulation classification: B ; 8) Protection classification:IP44 ; 9) Max. travel revolutions: 20 ; 10) Min. inside diameter of driving tube: ø46mm ; 11) Outside dimensions: ø45 x 580mm. Certification: CE, TUV. Choose different colors according to the customer's request. Customize different voltage according to the customer's request. Outer packing: 10pcs/carton. Carton dimensions: 620x 400 x 190mm.

Three-Phase Induction Motor
1) Totally enclosed fan cooled 3-phase induction motors ; 2) High efficiency, energy-saving low noise, little vibration, reliable running ; 3) The mounting dimensions and power class are wholly conformed to IEC standards ; 4) Series Y as conventional usage is widely used for driving various kind of machinery, machine tools, pumps, blowers, conveyers, mixers, agriculture machinery and mine machinery ; 5) The power supply: rated voltage 380V, rated frequency 50Hz ; 6) Insulation class B and the protection degree IP23 ; 7) Basic mounting type is IMB3

125cc Engine
1) Engine type: single-cylinder, air-cooled, 4-stroke ; 2) Bore x stroke: 56.5 x 49.5mm ; 3) Displacement: 124ml ; 4) Max. power: 7.6kW/9000rpm ; 5) Max. torque: 8.5N.m/7500rpm ; 6) Clutch type: wet multi-disc ; 7) Start method: kick-start ; 8) Gearshift mode: 4-speed, non-cyclic ; 9) Applicable motor type: motorcycle

AC/DC Motor
We can supply various large and medium size Motor from china.

PWM Motor Controller for E-scooter, E-motorcycle
1.Current limiting: prevents the motor current from exceeding the specified value thus avoids damage to the motor and the controller due to over-current ; 2.Battery deficiency protection; 3.Power cut-off during braking; 4.Over-speed prevention during electric charging (optional); 5.Suspended terminal easy of connection and reliable (optional); 6.Power relay can be switched off once MosFET demage to prevent hazardous event happen (optional); 7.Speed-Limiting function; 8.1+1 Auxiliary motor drive modefor Intelligent controller to meet with Eurp & Japan market need.

Gasoline Engine Pump
1) 'Tontop' overhead valve engine ; 2) 1.5" suction and discharge ports ; 3) 73 gallons per minute discharge ; 4) Capacity: high output, high pressure pump ; 5) 55psi max. ; 6) 1.5" ports max.

Diesel Engine
1) Type: CM170F ; 2) Bore x stroke (mm): 70 x 55 ; 3) Starting system: electric or by hand ; 4) Fuel tank capacity (L): 2.5 ; 5) Lubrication oil capacity (L): 0.8 ; 6) Displacement (cc): 211 ; 7) Diesel engine models ranging from 170F to 186F

Scooter Motor
1) Power: 300W ; 2) Voltage: 24V ; 3) Rated speed: 120rpm ; 4) Reduction ratio: 1/33 ; 5) Noise: 58dB

Vibration Motor, Micro Motor, DC Motor, Coin Motor
We can supply Vibration Motor, Micro Mtor, DC Motor, Coin Motor from china.

Air-Cooled Gasoline Engine
1) Air-cooled, 4-stroke, OHV, horizontal shaft ; 2) Displacement: 270cc ; 3) Ignition mode: TCI ; 4) Compression ratio: 8.2:1 ; 5) Max. output: 9.0HP/3,600rpm ; 6) Max. torque: 1.95kg.m /2,500rpm ; 7) Start: recoil or electric (optional) ; 8) Fuel consumption: 230g/HP.h ; 9) Fuel tank capacity: 6.0L ; 10) Lube oil capacity: 1.1L ; 11) Air cleaner: dual silent (semi-dry) ; 12) Noise level: 81dB A/7m

Generator
Features: 1) Automatic voltage regulator ; 2) Automatically stop the engine when oil level is too low ; 3) Easy to find the output voltage ; 4) Unique large-size muffler ; 5) Remind filling fuel timely ; 6) Different control panel available ; 7) Brush and brushless generator available ; 8) Three-phase and single-phase generator available. Specifications: 1) Engine: a) 1-cylinder, 2-stroke, air-cooled gasoline engine ; b) Work capacity: 63cm⊃3 ; c) Max. power: 2.5HP/rpm ; d) Ignition system: C.D.I ; e) Starting system: recoil ; f) Fuel tank capacity: 4L ; g) Continuous operating time: 6h ; 2) Generator: a) A.C. frequency: 50HZ ; b) Max. A.C. output: 800VA ; c) Rated. A.C. output: 650VA ; 3) Overall dimensions: 400 x 340 x 366mm ; 4) Dry weight: 20kg

DC-R Tubular Motor
1) Voltage: DC 12V, 24V ; 2) Power: 10W ; 3) Life weight: 0.7N.m (4.5kg) ; 4) Speed: 36rpm ; 5) Rated current: 0.25A - 0.15A

Brush Motor
Suitable for all kind of electric bicycles, scooters and other small vehicles.

Blower Motors, Electrical Window Lifters, Starters
1) Application: Passat, Audi, Benz, Jetta, Santana ; 2) Specifications: a) Model: 443, 837, 461S ; b) Power: 40W ; c) Voltage: 12V

Gasoline and Diesel Engine
Specifications: 1) Engine type: four-stroke, air-cooled, OHV gasoline engine ; 2) Displacement: 87 - 389cc ; 3) Max. output (hp): 2.4 - 13 ; 4) Ignition system: transistorized magneto ignition ; 5) Starting system: tecoil or electric starter. Features: 1) Low noise level and vibration ; 2) Large, stable power output ; 3) Easy-pull, quick starting ; 4) Low fuel consumption ; 5) Rugged and reliable

4 Stroke 13hp Gasoline Engine
1) Structure: single cylinder, air cooling, 4 stroke OHV, 13HP gasoline engine ; 2) Displacement: 389cc ; 3) Max. power: 9.5kw/4,000rmp/min ; 4) Rated power: 8.5kw/3,600rmp/min ; 5) Max tortile: 19N.m/2800rmp/min ; 6) Igniting way: transistor ; 7) Gasoline engine bore x stroke: φ88 x 64mm ; 8) Starting way: pull with hand (bounce-back starting) ; 9) Sump volume: 1.3L ; 10) Noise: 66dB (7m out) ; 11) Oil box volume: 8L ; 12) EPA arrpoved ; 13) 13HP gasoline engine ; 14) Suitable for use on water pumps, generators and pressure washers