|
 Make
Up Mirror
1) Magnfying with 15w buld inside. 2) Magnification: 2x, 3x and
5x. 3) Material: steel, brass, glass. 4) Finished: nickel, gold,
chrome, silver. 5) Voltage: 220V / 50 Hz or 110V / 60Hz. 6) Plug:
according to the clients' requirement. 7) Wire: according to the
clients' requirement. 8) Mirror size: 220mm in diameter. 9) It
turns and revolves 360 degrees allowing a detailed and superior
view from any angle
Infrared
Lens
Specifications: 1)EFL(MM): 50mm. 2)F/#(F): 0.7. 3)Range of the
aperture : fixed. 4)Circular FOV :22.6. 5)Backward distance (mm):
20mm. 6)Interface mount: M45X1. 7)Total length of the lens (mm):
74mmX74mm.
Tripod
Screen
1) Housing in black RAL 9005. 2) Scratch and shock resistant
paint. 3) Octagonal-profile sheet metal housing cross section
55mm. 4) Circular tube tripod stand. 5) Tension button device for
a flat screen. 6) Tripod, handle, tension button, hook and end
caps in black available Magnifiers
1) Flat, light and powerful magnifier to enhance the enjoyment of
reading. 2) The magnifier of bookmark with an attractive design
on the top area. 3) Small size and easy for carrying. 4) Cheap
and handy for premium or little gift. 5) Customer's designs and
logos are welcomed Vari-Focal
Lenses
Specifications: 1) Sensor: 1/3" or 1/4" 2) Focal
length: 6.0~15 mm. 3) Aperture: F1.4. 4) Mount: CS. 5) 1/3"
diagonal field of view: 54.2~23 Deg. 6) Minimum object distance:
0.1m. 7) Dimensions: Dia 33 x 60.1mm. 8) Weight: 110g PC
Lens
1. High quality silk-screen printing Acrylic/PC lens. 2.
Available in various sizes and colors. 3. Customized designs
welcome. 4. 3D graphics available. 5. Available in complex and
metallic colors. 6. Hard coating for scratch-free. 7.
Flame-retardant material: PC, PMMA, PVC, and so on LED
Magnifier with Light
1) Batteries included. 2) Logo printing available, ideal for
promotion. 3) Can be used with or without the LED light. 4)
Simply push and hold the white button located in the lower right
corner inward, the LED light will shine. 4) Note: batteries that
power the LED light are non-replaceable. 5) PVC material. 6)
Size: 5.5 (L) x 8.5 (W)cm. 7) Multiple: 3x Point
Open Red Dot Sight
Features: 1) Magnification: 1x. 2) Objective diameter: 22 x 33mm.
3) Exit pupil: 22-33mm. 4) Length: 82mm. 5) Eye relief: free. 6)
Field of view: 51.84' at 100yds. 7) Shock resistant to 2000g. 8)
Parallax ≤4'. Water-resistant / fog-proof. Shock-resistant.
Tubeless design. Ultra-light weight-less than 180g. Unlimited eye
relief. 3 MOA ,5 MOA,8 MOA,10 MOA dot for target acquisition. 7
position rheostat for brightness control. Low power consumption
for long battery life. Battery can be replaced without removing
the sight. Windage and elevation adjustments with locking screw.
Integrated Weaver-style mounting system. Ideal for shotguns,
paint ball guns, crossbows.
Optical
Lenses
Dia. 3mm - 200mm; R 3mm - 1,500mm. Various precision spherical
optical lense is a precision optical component for camera, video
camera, telescope, film projector, duplicator, microscope and
other observation instruments. Magnifying
Glasses
1) Magnifying glasses with big and small lenses. 2) Optical
clarity and comfort for easy reading of fine print. 3) Practical
for every-day use. 4) Ideal for map reading, stamp and coin
collecting or as a professional aid to scientists and hobbyists LED
Optical Lens, LED Optics
All kinds of optical lens for power LED: 1. Narrow angle, medium
angle, wide angle. 2. Diffused or clear. 3. Imported acrylic
material. 4. Best light maintenance rate. 5. Different diameters
available. 6. Oval light pattern is available too. Applications:
Power led secondary optics Eyewear
Retainers
The purpose of a lanyard is to hold an id card as well as other
small objects around ones neck thus leaving the hands free.To
attach a pair of glassed, make your life easier. Individual
Packing(OPP bag or Blister) or Bulk Packing Optical
Benche
optical benches is one multifunctional optics instrument, it's
bearing all kinds of optics component in the optics, investigate
lens imaging rule, focus, it can be to experiment with
microscope, telescope and so on by students, if add others
necessery parts, the opticsf also can to be the intervene,
diffract, polarization, and another some projection demonstrate. Filter
Adapter Ring
Features: 1) Used to match with cameras. 2) Beautiful design and
refined work. 3) Material: aluminum alloy. 4) Specification: from
25mm to 86mm and from 86mm to 25mm Laser
Range Finder
A manufacturer of various optical products, such as laser range
finders, binoculars, rifle scopes, night vision devices, golf
scopes, medical optical instruments, microscopes, digital
binocular-cameras, telescopes, etc. Optical
Crystal Wafers
We can provide different kinds of such products as OLPF base
blanks, wave blanks, deviation oscillate base blanks and optical
tubes from china. Magnifier
1) All kinds of model: Magnifier with plastic handle. Folding
magnifier. Head magnifier. Double light magnifier. Illuminated
magnifier. Jewels loupe. Others: for special use, old people and
the disabled. 2) Magnification available: 10X, 20X, 30X. Dual
magnification 10X & 20X Big
Lens For Night Surveillance
Surveillance / Night vision lens: 1. These lens will take you
very bright image, because them all own prodigious optics
aperture. 2. Them not only have big aperture, them also own
goodish resolving power at frequency and space in CCD. 3. At
first in manufacture, we use advanced gloomy light surroundings
design, user will easy take very bright image. Don't worry light
attenuation when through the lens. In the world, no one factory
can produce so many variety lens for surveillance field same
time. Our lens character is: F=1. 0 Camera
Screen Protector
Easy to attach Amazing Crystal Clear Screen Protector. Ultra
clear quality PET material Made in Japan. Ultra-high Transparency
Produces Vibrant Colors. Bubble-free Application. Protects
Sensitive Screen Against Scratches. Reduces UV Rays Caused by
Reflected Light, Protecting Your Eyes. Attaches smoothly with
self-adhering surface; leaves no residue when removed. Anti-Dust.
Washable and Reusable Rod
Lens
Our factory produces rod lens for more than three years with
complete specifications and stable quality. They are mainly
applied in lasers of line power and widely used in laser levels
and laser measurers. Reading
Magnifier
A4 size hand free news paper reading maagnifier with 4 white high
bright LED in frame of magnifier for light projecter in the dark,
it is weigh light for traveling convenience, could be help read
map on the car in dark place, the stand of magnifier easy to pick
up in they position. Aaa batteries provided long period using,
the battery easy to replace when battery was running out.
We have another pocket size magnifier with white LED light also,
It is thin and carry easy for traveling. It is convenience for
using and would not broken or crack in pocket. Ball
Lenses
Ball lenses are used for various tasks such as improving the
coupling between optical fibers and the emitters or detectors
they interface with. Standard size lenses range from 1.0mm to
5.0mm. Custom made sizes or special materials are also available.
All ball lenses can be ordered with full-surface anti-reflection
(AR) coating. We specialize in production of medium to large-size
series of custom lenses with exacting tolerances, high-grade
surface finish and difficult coatings. Please send us your
specification or drawing and we will be happy to return a
quotation ASAP. Our average response time is within 24 hours.
Specifications: Diameter (Φs): 1-5mm or as requested
≤(60mm). E.F.L.: as requested. Wavelength : as requested.
Material: BK7 (K9) or fused silica or as requested. Sphericity:
¡À0.003mm. Diameter Tolerance: ¡À(0.01-0.1) mm (depends on
the diameter). Coating: as requested Collimating
Lens For Laser Diode
Hap Optics manufactures high quality glass lens and rod lens
which could be used in laser. We have single glass lens, doublet
glass lens and lens assembly which has three glass lenses and a
barrel with screw thread. These lenses could be used as a
collimating lens for red laser diode (635nm, 650nm, 670nm
wavelength etc) . Hap Optics produces lens for green laser
(l532nm wavelength) too. It is composed of 2 single glass lenses.
Many Kinds of lenses could be selected by you, and could design
and manufacture lenses according to your idea, spec, drawing etc. Lens
Clip Cap
1. Very convenient to cover and remove. 2. Strong lens cap can
protect your lens from sprinkle, dust and scratch. 3. 7 size
clips (52mm~77mm) fit most camera lens diameter. 4. Anti-missing
cord against lose. 5. Special design of clip make it suit for
filter as well. 6. 100% Original manufactory package Eyeglasses
Parts
Material: BETA Titanium. We can supply various eyeglasses parts:
Titanium temple or nose wire, Memory temple, Cupronickel temple,
Aluminum Alloy temple or frame, Silica leg tip or nose pad,
Memory plastic temple, tip Auto
Lensmeter
1) Dimensions: a) Length: 660mm ; b) Width: 620mm ; c) Height:
430mm (visor closed), 520mm (visor open). 2) Weight: 78kg. 3)
Power supply: 220V/50Hz, 110/60Hz. 4) Power consumption: 1,000W.
5) Max. water pressure: 7 bars. 6) Max. pump pressure: 7 bars. 7)
Pump section outlet: a) Supply voltage: 110V/220V ; b) Power
available: 350W. 8) Function parameters: a) Min. grinding
diameter: 20mm ; b) Max. grinding diameter: 80mm ; c) Min.
grinding height for inclined plane: 19.5mm ; d) Min. polishing
height for plane: 17.5mm Borosilicate
Glass
1. Material: borosilicate glass, pyrex, borofloat 3. 3. 2.
Durable to high temperature and pressure; resistance to high
temperature shock. 3. Clear glass and fine surface quality; no
dirts and bubbles inside. 4. Processing techniques: cutting,
polishing. 5. Application: lighting system, electronics,
electrical apparatus, industries, construction Digital
Camera Lens
1) The profile lens before mobile telephone LCD, MP3/4, digital
camera 2) Materials: PMMA, PC 3) Coating film test: under the
normal temperature and the speed of 0.5mm/second, the 8mm length
of the nick, 1kg power, the products have no the phenomena of
baring the underside and shedding 4) Pressure test: in normal
temperature condition. Put on static film of lens with standard
block 500g, 350g, 200g, let it last 68 hours, no mucus on the
static film 5) Hermetization test: under normal
temperature, to test the adhesion capability and mucosity
capability of faced coat of products, do shelling test within
split second to coat of testing products adhibited 3m adhesive
tape, no shelling exist 6) Temperature test: put the products
into high low-temperature test box set 70°C, no true colors, no
transmutation, on shed printing ink LCD
Protective Film, LCD Protective Filter
1) 0.125mm thick silicon base material protective film. 2) All
weather condition proved. 3) Good water-proof and chemical
resistance performance. 4) Excellent stiffness, up to 3H. 5) Good
anti-static electricity. 6) Mild silicon base adhesion,
bubble-free, non-streaking, non-corrosive. 7) Good re-peel
performance, no residue left. 8) Reusable, tackiness can be
restored by washing with water. 9) Dust and stain proved, no more
dust stick on the monitor by statid. 10) Good Scratch resistance.
11) Good transparency, 95% light transmission. 12)
Anti-ultraviolet. 13) Easy to be cleaned by neutral detergent.
14) Stability adhesion performance, excellent high or low
temperature resistance. 15) Dent proved, help absorbing partial
direct impact on screen. 16) Size and configuration: by
customer's cut option
|
