|
 Coal
Organic Heating Carrier Furnace
The organic heating carrier furnace is used in the chemical,
grease, petrochemical, plastic, rubber, textile, printing and
dyeing, fiber, wood, papermaking, printing, building materials,
traffic, air-conditioner, and other industries. Turning
Parts
1) Materials: different kinds of stainless steel, copper or
aluminum alloy. 2) Applied software for specification drawings:
Pro-E, Auto CAD 2000. 3) Main equipment: a) The maximum machining
precision: 10u ; b) Precision lathe, CNC lathe. 4) Surface
treatment: zinc plating, nickel plating, chrome plating,
grinding. 5) Applications: different kinds of machine parts.
Industrial
Fan Heater
1) Power: 5,000W, 400V. 2) Four setting: 55W high speed, 2,500W
low speed, 5,000W low speed and 5,000W high speed. 3)
Self-resetting thermostat. 4) Overheat protection. 5) Free
standing or wall mounted. 6) Cool blow available. 7) With fan and
handle. 8) Metal housing case. 9) Protection class IP44. 10)
Product measurement: 252 x 250 x 380mm Reverser
To prevent the gradient belt conveyor reversing or directing
slippage when it is parking, through calculating the distance and
the braking force, the reverser or the arrester must be used
according to the idiographic condition. The pin reverser is
applicably assembled at the head roller and connected with the
motor of reducer. It is usually used in the belt conveyor which
conveys upwards and the obliquity is less than 180 (β≤180).
It can brake rapidly and the reverse distance is short, so pin
reverser is the first selection in bigger power obliquitous belt
conveyor. Tie
Down and Ropes
1) Tie down: a) Weather-resistant, PE and PP webbing for strength
b) Double heat treated steel "J" hooks provide a secure
hold without scratches c) Quick automatic release d) Ideal for
cars, trucks, SUVs, boats and trailers 2) Rope: a) Materials: PE
and PP b) Diameter: 3 - 60mm c) Length: 20m, 30m, 50m, 110m and
220m d) Mainly used in fishing, marine, aquaculture and mountain
climbing Air
Blower
1) Streamlined compact design-attractive and simple install 2)
With special design of impeller, air flow is smoother 3) With
internal silencer on the base, noise can be reduced to the lowest
Industrial
Regulator
We supply various kinds of gas regulators, flow-meter regulators
and flow-gauge regulators. Our gas regulators can fully meet the
using requirements of pressure control and flow control for
welding, cutting and heating. High-Speed
Blast Nozzles
1) Produced using PIM. 2) Used in sand blasting, rust cleaning,
coating engineering and detergency mechanism. 3) Well used in oil
drills, planes, ships, automobiles, bridges, build engineering,
railroads, chemical industry, containers, power plants and other
machinery. 4) Main technical parameters: a) HRA: 89-93 ; b)
Density: 14.4 - 15g/cbm ; c) Transverse rupture strength:
>1,500Mpa.
Paper
Industry Blades
We adopt high quality material to produce various kinds of
blades, including paper making scraping blades, inlaid paper
trimmer blades, granulate blades, veneer blades, chipper blades,
roll cutter blades, shaver/flaker blades, tissue cutting blades,
log saws, and circular slitters. If you are in need of these
kinds of blades, please don't hesitate to contact us and we will
provide you the most suitable blades to help you achieve the best
performance of your machine. Spring
Machine
The machine has two axes controlled by computer precisely, one is
wire feed axis and the other is main axis, they can work
separately or synchronously. Shielding
& Armoring Machine
We can supply Series of Shielding & Armoring Machine. 1) Dia.
of cable to be taping, armoring (mm): 30-120. 2) 78B copper-wire
shielding machine: a) Copper wire dia. (mm): 0.4-1.5 ; b)
Stranding body (mm): 12 (steps) ; c) Shielding wire pitch (mm):
122-3773. 3) Concentric taping machine: a) Max. speed (rpm): no
step shift ; b) Tape (mm): 60 x 220 x 10-60. 4) Common taping
machine: a) Speed (rpm): 6 steps ; b) Pitch (mm): 12 - 132 ; c)
Taping pitch (mm): 4B. 5) Steel-armoring machine: a) Max. speed
(rpm): 8 steps shift ; b) Taping pitch (mm): 23-480 ; c) Tape
(mm): 2B. 6) Haul-off machine: a) Max. drawing force: 1.25T,
1.6T, 2T, 2.5T ; b) Haul-off line speed (m/min): no step shift
Industrial
Aluminium Profile
1) Industrial profiles for chemical industry, electronic,
electric, and machinery industry. 2) Material: 6063-T5, T6. 3)
Surface treatment: a) Mill finished ; b) Anodized silver (matte)
; c) Powder coated Bladder
Accumulator
Bladder accumulator is a type of power storage. It stores partial
power and release them in necessary time. This device can make
the utilizing of power more reasonable and realize the purpose of
safety handling. Our bladder accumulators consist of a welded or
forged pressure or casting steel vessel (shell), a bladder and
ports for gas and fluid inlet. The gas and fluid sides are
separated by the bladder. Pneumatic
Riveting Machine
Motor: 1/2HP. Stroke: 20-40mm. Riveting capacity (mild steel):
solid rivet: 1-8; hollow rivet: 1-15. Working cycle time (sec):
0-6. Ordinary pressure (kg/cm²): 1-7. Max. pressure (kg/cm²):
230-800. Max. length rivet (mm): 200. Weight (kg): 105. Frequency
(Hz): 50/60. Speed (rpm): 1,400 Copper
Clad Aluminum Wire Production Line
specializing in copper clad aluminum wire production line. it is
use cooper belt and aluminum wire as material; and can cover the
copper on the aluminum wire surface. Features: 1) Material of
aluminum: diameter 8.5mm. 2) Material of copper: density: 99.97%,
width 31.2mm, thickness: 0.38mm. 3) Finished wire with diameter:
10mm. 4) Production capacity: 6 meters/minutes Crusher
1) Function: crush the whole bottles into small flakes. 2)
Machine size: 2,500 x 1,360 x 2,950. 3) Sieve mesh: 15mm or 20mm.
4) Stationary knife dimensions: 485 x 120 x 20mm, 4pcs. 5)
Rotating knife dimensions: 480 x 110 x 20mm, 8pcs. 6) The axis of
the crusher passes the vibration testing. 7) Motor power: 37kW.
8) Knife sharps per 24hrs, life is about 400hrs. 9) Crusher
speed: 420rpm. 10) Material: carbon steel Stainless
Steel Tank
1) Inner and outside mirror polishing, easy to clean. 2) The
inlet is stainless steel 304 or 316L. 3) Volume: 50-1,500L. 4)
With jacket / single layer. 5) The bottom of the tank is with a
slope angle or the bottom is round to facilitate the discharging.
6) Configured with outlet valve, Wanxiang Wheels with brake
device Grinding
Wheel Incising Machine
The grinding wheel incising machine can be used in construction,
hardware, petroleum chemicals, machine, metallurgy, and
installing of water and electricity fixture. It can incise
circinal pipe material and of other figures as possible as angle
iron, trough iron, flat iron. It will do better when the incised
materials are stainless steel, axletree steel, alloy steels, and
quenching steel. Mini
Lathe
Specifications: 1) Spindle bore: 20mm. 2) Taper of hole in
spindle: Morse no.3. 3) Taper of the hole in tailstock: Morse
no.2. 4) Spindle speeds (variable speed):
450-2,500rpm/200-1,250rpm. 5) Longitudinal feed (min.): 0.09mm.
6) Metric thread: 0.4-2mm. 7) Power of motor: 250W/400W. 8)
Voltage/frequency (by areas): 220-240V, 110V AC/50Hz, 60Hz. 9)
Max. swing over bed: 180mm. 10) Max. length of workpiece: 310mm.
11) Max. swing over slide: 105mm. 12) Net weight: 40kg. 13)
Overall dimensions (L x W x H): 810 x 285 x 282mm. 14) Standard
attachments: a) Three-jaw chuck: 1pc ; b) Center morse no.2: 1pc
; c) Change gear: 7pcs Valve
Cover
1) Lightweight, corrosion resistance, perfect insulation. 2) Easy
to install, handcraft, smooth surface and perfect experience. 3)
Function: anti-rust, fireproof, waterproof protect the valve from
being destroyed Acrylic
Vacuum Molding Machine
Updated grade machine: a heating room can be moveable that can
save space. Heating sheets and taking sheets automatically.
Optical controlling can keep the balance of hydraulic pressure. A
heating room is divided into three parts, so that it can save
energy. The heating pipe can distribute heat everywhere. The
devices can control temperature automatically. High-tech
hydraulic pressure: we can use high pressure to mold big letters
as well as low pressure to mold small letters. Technical
parameter: Weight of machine: 3.5MT. Height of lift: 550~600mm.
Heating power: 13.5~27kW. Size of machine: 3,350 x 2,300mm.
Heating temperature: standard ~300oC. Voltage: 50Hz
380V. Pressure: 5~16T Horizontal
One On One Roller Press Machine
1) Adopts the gradient press - fit way, the glass press - fit
effect to be better. 2) The thickness adjustment is convenient.
Main technical data: 1) Power supply: 380V. 2) Total power:
1.1kW. 3) Insulating glass width: ≤1,600mm. 4) Max.
insulating glass thickness: ≤40mm. 5) Circulate speed:
4.6m/min. 6) Dimensions: 2,060 x 2,100 x 1,400mm. 7) Total
weight: 1,500kg Multi-Head
Strip Cutting Machine
This machine is a kind of plate-cutting machine in high
efficiency for straight plate, which the longitudinal cutting
guns can be deployed according to the requirement. Many pieces of
plates can be cut at same time accompanied by oxygen acetylene
gathering arrays to avoid changing the gas bottles frequently. UPVC
Double-Strand Tube Extrusion Production Line
1) Adopts European advanced technology. 2) Reaches the perfect
match of internal quality and appearance, realizing the high
efficiently brought. 3) Double stand extruder diameter: 16 -
63mm. 4) Making full use of the extruding capacity of the
extruder. 5) Producing small diameter pipe can reach higher
quantity Winding
Machine
The four-dimensional multiple working position automatic winding
machine designed and manufactured all by our company has superior
fittings and multiple alternative tension control system. It
works under high stability and reliability. The high-precision
and high-speed winding process is controlled automatically by
software and the four shafts work together. The winding line
types include helical line, hoop line, dwelling line, polar line
and zero line. Automatic
Horizontal One Strip Two Reel Rewinder AHATR
Specification: 1)Model: AHATR-001. 2)Coil Outer diameter (mm):
600-900. 3)Coil Outer Width(mm):75(max). 4)Reels & Paper
Reels (pcs):2. 5)Weight(kg): 25 (max.). 6)Orientation: positive
direction/opposite direction. 7)Way of collection:1pcs receive
the material. 8)Speed (m/min): 20 (max.). 9)Sample: automatic.
10)Control: PRC. 11)Air hold down arm (Mpa): 0.4 up to.
12)Voltage: 3Ø,380V/220V Cylinder
1) Motion pattern: double action. 2) Working medium: air. 3)
Fixed types: basic type, FA type, LB type, SDB type. 4) Operating
pressure range: 1~9.0kgf/cm2. 5) Ensured pressure resistance:
13.5kgf/cm2. 6) Operating temperature range: 0~70oC. 7) Operating
speed range: 50-800mm/s. 8) Buffer type: buffer spacer. 9) Joint
pipe bore: G1/8" Sawdust
Dryer
For raw materials with heavy moisture content that above 12%, you
need to install a drier, this dry make the moisture content below
12% before feeding them into Biomass / Charcoal Briquetting Screw
Press. The Water reducing rate of the dryer is 8-12%. If the
water content of the raw material is too high, it will need
several times of drying to achieve the requested water content
for briquetting. Test
Benches
Functions: 1) Checking of the mechanical speed regulators,
checking of the electromagnetic valve of distribution pump. 2)
Measurement of the reflux delivery of distribution pump, the test
and adjustment of distribution pump. 3) Measurement of interior
pressure of distribution pump, checking of the vacuum capacity
regulators, Advance angle measurement. 4) Checking of the sealing
of injection pump, Self-suction joint, Printer (optional),
Data-base (optional), Measure rack bar travel. 5) Measurement of
the delivery at various rotation speed, checking of beginning and
interval angle of the pump. 6) Checking of the pneumatic speed
regulators, checking of the pressure compensators.
|
